SITRANS FMS500

SITRANS FMS500
The SITRANS FMS500 sensor with hard rubber NBR and EPDM liners is designed for any water application.

• Zero Up and Zero Down installation capabilities
• EPDM lining specifically for drinking water applications requiring special approvals
• NBR rubber liner for all water and wastewater applications
• Increased low flow accuracy for water leak detection
• Suitable for underground installation and permanent immersion (IP68) or underwater installation
• Integrated grounding electrodes - no grounding rings required for many applications
• Short delivery time
• Connected to the SITRANS FMT020 transmitter, it forms the magnetic flowmeter system SITRANS FM520:
  - SENSORPROMTM Technology provides an automatic upload of start-up settings and calibration data for easy commissioning
  - Plug & Play - allows easy on-site replacement and commissioning of the transmitter in just a few minutes
  - Mounting flexibility - compact or remote installation possible
  - Validated calibration ensures accurate flow measurement. Each Siemens flowmeter is calibrated in facilities that are individually accredited to ISO / IEC 17025.
  - Service and diagnostics - Designed to allow in-situ verification for easy performance check

Detail

• Measuring range: 0 to 10 m/s
• Nominal sizes: From DN 15 to DN 1200 (1/2" to 48")
• Accuracy: Standard 0.4% of rate, option for 0.2% of rate
• Operating pressure: Max. 40 bar (Max. 580 psi) (dependent on sensor size)
• Ambient temperature: –20 to 70 °C (-40 to 158 °F)
• Medium temperature: -10 to 70 °C (14 to 158 °F)
• Liners:
  - EPDM
  - NBR
• Electrodes:
  - Hastelloy C-276
  - Built-in grounding electrodes
• Material: Carbon steel, with corrosion resistant two-component epoxy coating
• Drinking water approvals: EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, AS/NZS 4020, GB/T 5750, ACS and BelgAqua

Documents

• Spec Sheet
• Manual